Measurement assistance March 25 2014
So if you're new to the wedding dress world one thing you should know is that manufactures make wedding dresses roughly 1 or 2 sizes smaller than the standard high street measurements. We have no clue why they do this but for example a size 12 in normal clothes will generally be either a 14/16 in a wedding dress. So please bear this in mind when you consider buying a dress.
Before you buy a dress you should get your measurements done, if you can I would recommend going to a tailor as they will give you the most accurate measurements. However if you are like most of the general population and don’t have access to a tailor all you need is a fabric tape measure and a trusted friend or family member.
First thing to do is remember you will not be wearing clothes under your dress so try and make sure you have on good underwear or indeed the underwear you are planning to wear on the day. You will need to measure the Bust, Waist, Hips, Hollow to Hem and if you are wearing a dress with sleeves the Arm Girth and Inside Sleeve. Remember to have a pen and piece of paper to hand.
Bust- Your bust is not your bra size so don’t automatically go on what the measurement is in your bra. Take the tape around your back and bring it across the fullest part of your bust which is across your nipples. Arms should ideally be down at your sides as they would be when wearing the dress.
Waist- Measure the smallest part of your waist, normally an inch or so above your belly button. Take the tape all the way around to measure. Remember try not to suck in as you will want to be able to breathe on your wedding day.
Hips- The widest part of your lower body, measure across the hipbone. Take the tape all the way around about 7 inches below the waistline.
Hollow to Hem- Take the tape and begin at the hollow of your neck and measure down to where you want the dress to end. And if you want a fuller skirt, measure out at an angle to allow for the full dress. If you can wear the heels you will wear with your wedding dress if not wear one's of the same height.
The next two measurements are only required if you are planning on wearing a dress with sleeves;
Arm Girth- Measure around the largest part of your upper arm.
Inside Sleeve- Begin the measuring tape from your armpit along you straight arm to your wrist.
Remember it is always better to round the number's up and have the dress a little big (don’t suck in as every woman does when trying on dresses it will give you unreliable measurements and you might get disappointed if the dress turns up and its too small). Also ladies I know most of you will most probably be thinking of losing weight for the wedding (for some reason) but don’t take this into account when measuring because taking the dress in is way easier than taking it out and cheaper.
If you not 100% sure still where to measure use the picture to get a basic idea of where to measure on your body.
As outlined above wedding dress sizes run smaller than your run of the mill everyday high street sizes. So if you plan on buying a dress without getting yourself measured this might help you decide which size to go for or at least understand the sizing options better.
I hope you have found this helpful, if you have and question or comments please email us at : firstname.lastname@example.org
Wedding LookBook Team